| Specification | Description |
|---|---|
| Manufacturer | Aetna Standard and Sumitomo |
| New in 1985 | |
| Line Speed | 350 fpm max / 106 mpm |
| Strip Thickness | .015 - .060" / 0.36 - 1.52mm |
| Strip Width | 26 - 72.6" / 660 - 1844mm |
| Coil Size | ID - 24" / 610mm |
| OD - 90" max / 2286mm | |
| Wt. - 60,000lbs max/ 27.2mtons | |
| Zinc Coating Capability | 10-125 grams per square meter |
| on two sides | |
| Nominal Annual Capacity | 400,000 US tons/ 363,000 mtons |
| Equipment | |
| - Entry Group | 2 coil conveyors |
| 2 coil cars | |
| 2 payoffs | |
| 2 flatteners | |
| 2 shears | |
| - Welder | |
| - Strip Edge Notcher | |
| - Pre-Cleaner | Hot water |
| - #1 Hot Air Dryer | |
| - #1 Bridle Roll | |
| - Entry Looping Tower | |
| - #1 & #2 Steering Roll Units | |
| - Leveler | |
| - Caustic Dip Tank | |
| - #1 Top & Bottom Brushes | |
| - #1 & #2 Electrolytic Caustic Cleaning Tanks | |
| - Hot Water Rinse | |
| - Electrolytic Pickle Tank | |
| - #2 Top & Bottom Brushes | |
| - Cold Water Rinse | |
| - #3 Steering Roll | |
| - Spray Tank | |
| - 20 Plating Cells | |
| - Post Plating Rinse | |
| - #2 Hot Air Dryer | |
| - Top&Bottom X-Ray Coating Weight Gauge | |
| - Deflector Rolls | |
| - Runout Table | |
| - Polisher | |
| - #3 Hot Air Dryer | |
| - #3 Birdle Roll | |
| - Strip Edge Printer | |
| - #4 & #5 Steering Rolls | |
| - Delivery Looping Tower | |
| - #4 Bridle Roll | |
| - Surface Inspection Station | |
| - Electrostatic Oiler | |
| - Delivery Shear | |
| - Tension Reel | with coil car and scale |
| - Bander | |
| - Shuttle Car | |
| - Packing Station | |
| - Chemical Plant | Zinc hopper & reactor |
| Fliters | |
| Chelate | |
| Zinc dissolution tank | |
| Evaporators | |
| Recirculation tanks | |
| Sold "as is, where is" installed, decommissioned 2006. | |
| Can be purchased and moved or purchased and operated in place. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com