Request A Quote On This Item| Specification | Description |
|---|---|
| Manufacture | ADS Machinery / 1986 |
| Application | |
| - Originally made for a 1700mm aluminum continuous strip anneal line | |
| but were never used due to an order cancellation. | |
| Roll Size | 30" diam x 76" face |
| Shaft Diameters | 125, 150, 155 and 165mm |
| Neck Diameters | 70, 75, 90 and 95mm |
| Roll Coating | |
| - Rolls were not coated due to the order cancellation. They were | |
| designed for sulphur-free neoprene coatings with 65 -75 shore "A" | |
| durometer hardness which results in an OD of 787mm (31"). | |
| Estimated Roll Weights | 613-684kg/roll (1350-1500 lbs) |
| Condition | light rust |
| may require refinishing b4 use | |
| Potential Uses | |
| - Rolls can combine to make two 4-roll tension bridle stands for a | |
| tension leveling line (frames must be built). | |
| - Rolls can also be used in a continuous strip anneal lines, coil | |
| coating lines, etc. | |
| - We can supply engineering for a leveling stand or complete leveler | |
| including drives. | |
| - For widths above 52", we can provide new tension leveling | |
| for strip up to 67" max. (1702mm). | |
| Sold "as is, where is" USA |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com