| Specification | Description |
|---|---|
| Manufacture | BWG / 1975 |
| Total Rebuild | 1999 - mechanical overhaul |
| PLC & DCelectrics replaced new | |
| Strip Width | 1350mm max |
| Strip Thickness | 0.5mm - 6.0mm |
| Line Speed | 100 mpm / 328 fpm |
| Coil Size | ID - 453/620 entry, 508mm exit |
| Weight - 10 mtons /22,000 lbs. | |
| Material | Steel-cr/galv/coated/stainless |
| Aluminum | |
| Elongation | 5% max |
| Equipment | |
| - Uncoiler | Mandrel, hyd expansion |
| 100 hp DC motor | |
| - Pinch Roll | 2-roll, 20hp DC motor |
| - Flattener | 5-roll |
| - Entry Crop Shear | Mechanical type |
| - Welder | Clamp type |
| - Pinch Roll | 2-roll |
| - Entry Tension Bridle | 4-roll horizontal type |
| 220 kW DC motor on each roll | |
| Mechanical differential | |
| 1225mm dia x 1524mm face rolls | |
| Rubber coated | |
| - Flex-Section Leveler | 6-Hi cartridge type |
| - Work Rolls | 45mm dia x 1494 mm face |
| - Backup Rolls | 35mm dia x 1494 mm face |
| - Exit Tension Bridle | 4-roll horizontal type |
| 220 kW DC motor on each roll | |
| Mechanical differential | |
| 1225mm dia x 1524mm face | |
| Rubber coated | |
| - Pinch Roll | |
| - Exit Crop Shear | Mechanical type |
| - Tension Roll | 2-roll, rubber coated |
| - Recoiler | Mandrel type, hyd expansion |
| 55 kW DC motor | |
| - Belt Wrapper | |
| - Exit Coil Car | |
| - PLC | Rockwell , new in 1999 |
| - DC Drives | Reliance, new in 1999 |
| - Edge Control | Fife system |
| Sold "as is, where is" installed and in production. | |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers