| Specification | Description |
|---|---|
| Manufacture | Stamco/McKay - 1974 |
| Strip Width | 10" - 52" |
| Strip Thickness | .005" - .032" |
| Material | Aluminum and its alloys |
| Line Speed | 1250 fpm |
| Coil Size | Entry ID - 16" |
| OD - 84" (90" clearance) | |
| Exit ID - 9", 12", 16" arbors | |
| Coil weight - 17,000 lbs. | |
| Equipment | |
| - Downender | |
| - Entry Turnstile | Stamco 2-arm |
| Hyd push-off | |
| 21,000 lbs max with spool | |
| - Uncoiler | Stamco, 75 hp |
| 300/1800rpm, 3.343:1 gearbox | |
| 15" retracted ID | |
| 16.75" expanded ID | |
| Hold down roll | |
| - Peeler Table | Lift and extension |
| - Pinch Rolls | |
| - Behlen Strip Joiner | 50hp, 1775rpm |
| Hyd pumps, 2 x 60 gpm | |
| - Side Trimmer | Stamco, 7.5hp |
| - Scrap Chopper | Stamco, 5 hp |
| Support Roll | |
| Tension roll | |
| - Scrap Blower | Stamco "Turbo" |
| 5 hp, drive, 15 hp fan | |
| - Entry Centering Guides (2) | MEA, laser sensor |
| - Entry Bridles | Stamco, 4-roll type |
| 23.5" diam x 56" face rolls | |
| Nova-thane #3 covering | |
| Snubber rolls - 8", steel | |
| - Tension Leveler | McKay (Voss) |
| 15 hp, 850 rpm, 5.136:1 | |
| Top frame lift | |
| Driven roll bend adjust | |
| Tilt adjust motors | |
| - Preflex Unit | 1 top, 1 bottom module |
| 3 backup rolls, 2 intermediate | |
| 1 work roll | |
| - Flattener | 1 top, 1 bottom module |
| 5 backup rolls, 4 intermediate | |
| 3 work rolls | |
| Mist lube system | |
| - Exit Bridles | Stamco |
| 24" diam x 56" face | |
| Nova-thane #3 covering | |
| - Mechanical Differential Bridle Drive System | ask for our complete spec |
| - Exit Centering Guide (2) | Askania, air edge guide |
| - Thread Tables | |
| - Exit Shear | Stamco, 10 hp |
| - Recoiler | Stamco, 150 hp |
| Push-off plate, traversing | |
| - Exit Coil Car | Stamco, lift cylinders |
| - Belt Wrapper | Stamco |
| - Electrical Controls | Complete |
| - Hydraulics | Complete |
| ask for complete spec | |
| Sold "as is, where is" off foundation. | |
| HEPCO/MRC accept no responsibility for incorrect data supplied | |
| by plant/original owner. Inspection should be done to verify data. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers