| Specification | Description |
|---|---|
| Manufacture | Herr Voss / 1975 |
| Material | Stainless - 200,300,400 series |
| Some bright annealed | |
| Number of Cuts | 10 |
| Line Speed | 200 fpm max for leveling |
| 350 fpm max for slitting | |
| Strip Thickness | .125" max for leveling |
| .187" max for slitting | |
| Strip Width | 19 - 51" (483 - 1295mm) |
| Strip Yield Strength | 55,000 psi max for leveling |
| Coil Size | ID - 20" |
| OD - 66" max | |
| Weight - 35,000 lbs max | |
| Equipment | |
| - Entry Coil Car | Driven roller |
| - Uncoiler | Expanding mandrel |
| 125 hp, 500/1800 | |
| - Entry Centering Guides | |
| - Pinch Roll / Flattener | 26" diam x 60" face rolls |
| 2 rolls over 3 | |
| 5 hp 1800rpm AC at pinch roll | |
| 20hp 1800rpm AC at flattener | |
| - Crop Shear | Herr Voss, hydraulic |
| - Scrap Box & Diverter Table | |
| - Entry Pinch Roll | 24" diam x 60" face rolls |
| - Tension Leveler | 3.5" x 60" work rolls |
| 6" x 60" backup rolls | |
| Not driven | |
| - Exit Pinch Roll | 24" diam x 60" face |
| - Exit Shear | Herr Voss, hydraulic |
| - Recoiler | 17,500 lbs, mandrel type |
| 125hp, 500/1800rpm, 26:6:1 | |
| - Exit Coil Car | 17,500 lbs |
| - Footprint | 140 ft x 40 ft |
| - Spares / Additional Equipment | 2 scrap winders |
| Slitter stand with spare arbor | |
| Many spare blades | |
| Many spare pinch roll sections | |
| Sold "as is, where is" cleaned, painted, loaded on trucks, USA. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers