| Specification | Description |
|---|---|
| Manufacturer | Mitsubishi / 1997 |
| Configuration | "Wet-type" leveler installed |
| in a hot dip galvanizing line | |
| Strip Limits | |
| - Thickness | 2.3 - 6.0mm / .091 - .236" |
| - Width | 720 - 1890mm / 28.3 - 74.4" |
| Line Speed | 260 mpm max / 852 fpm |
| Strip Tension | 45 mton max / 99,180lbs |
| Strip Elongation | 3% max |
| Equipment | |
| - Entry Tension Bridle | 2-roll design |
| 1200mm diam x 2100mm face | |
| Urethane covered | |
| Roll 1 drive - 700kW x 1185rpm | |
| Roll 2 drive - 132kW x 1770rpm | |
| 1.15:1 gear ratio | |
| MOTORS NOT INCLUDED | |
| - Flex-Roll Section | 5 work rolls - 80mm x 2100mm |
| Backup rolls - 160mm x 233mm | |
| Transverse-bow Correction roll | |
| = 300mm diam x 2100mm face | |
| - Exit Tension Bridle | 2-roll design |
| 1200mm diam x 2100mm face | |
| Urethane covered | |
| Roll 3 - 132kW x 1770rpm | |
| Roll 4 - 700kW x 1185rpm | |
| 1.15:1 gear ratio | |
| MOTORS NOT INCLUDED | |
| - Wringer Rolls | 2 sets |
| 300mm diam x 2100mm face | |
| Hydraulic loading system | |
| - Water Spray System | Spray headers and piping with |
| water-proof cover | |
| Sold "as is, where is" installed, not running. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers