| Specification | Description |
|---|---|
| Manufacture | Bronx (USA) |
| 1974 original, 1983 rebuilt | |
| Line Speed | 200 mpm max / 656 fpm |
| Strip Thickness | 0.4 - 3.0mm / .016 - .118" |
| Strip Width | 800 - 1500mm / 31.5 - 59" |
| Coil Size | ID - 500-600mm / 19.7-23.6" |
| OD - 1830mm max | |
| Weight - 9.0mton max/19,836lbs | |
| Equipment | |
| - Coil Storage Ramp | 3 coil capacity |
| - Coil Car | |
| - Uncoiler | Double-stub mandrel |
| Hydraulic expansion | |
| Sliding base | |
| 2 x 35kW DC drag generators | |
| Hold down roll | |
| Powered pinch rolls | |
| - Entry Crop Shear | |
| - Behlen Strip Joiner | |
| - Entry Tension Bridle Stand | 4 roll configuration |
| 17.7, 35.5, 71.1, 142.2 kW DC | |
| drives & gearbox (individual) | |
| - Flex-Roll Stand | Five 60mm diam work rolls |
| Ten 165mm diam backup rolls | |
| 200mm entry & exit guide rolls | |
| - Exit Tension Bridle Stand | 4 roll configuration |
| 196.6, 93.3, 47.4, 23.7 KW DC | |
| drives & gearbox (individual) | |
| - Inspection Table | |
| - Pinch Roll Stand | |
| - Exit Crop Shear | |
| - Edge Trimmer | with scrap baller |
| - Recoiler | 100hp DC drive with |
| 2-speed gearbox | |
| Sliding base | |
| Hydraulic push-off | |
| Outboard bearing | |
| Belt wrapper | |
| - Exit Coil Conveyor | |
| Sold "as is, where is" installed, in excellent condition. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers