| Specification | Description |
|---|---|
| Manufacturer | Salem - HerrVoss - BWG |
| 1987 | |
| Line Speed | 1000 fpm max / 300 mpm |
| Strip Thickness | .007 - .020" / 0.18 - 0.50mm |
| Strip Width | 27.5 - 62" max / 700 - 1580mm |
| Coil Size | ID - 16" / 406mm |
| OD - 76" max / 1940mm | |
| Wt. - 23,000 lbs max / 10.5 MT | |
| Typical Leveling Tension | 56 kN, 70.1 Kn max. |
| Equipment | |
| - Dual Payoffs | 50 hp DC with pinch rolls and |
| passover to shear | |
| - Shear | Double-cut type, pinch rolls |
| - Joiner | NOT INCLUDED |
| - Edge Trimmer | Canted head with scrap chopper |
| - Tension Leveler Section | |
| - Entry Tension Bridle | Four 17.3"diam x 65 face rolls |
| 30, 60, 115 & 220hp individual | |
| DC drives | |
| - Flex-Roll Unit | BWG / 1987 |
| - Number of Roll Assemblies | Five Cassettes |
| - Work Roll Diameters | 1.1", 1.1", 1.1", 1.18", 1.73" |
| - Backup Rolls (10) | 60mm diam |
| - Roll Arrangement | 3 over 2 in each cassette |
| - Adjustability | Hydraulic on top rolls |
| - Exit Tension Bridle | Four 17.3"diam x 65 face rolls |
| 240, 130, 75, 40 hp individual | |
| DC drives | |
| - Entry Accumulator | 14 strands with 527 ft of |
| strip storage | |
| Steering unit | |
| - Vertical Strip Cleaning & Pretreatment Section | |
| - Exit Accumulator | 22 strands with 828 ft of |
| strip storage | |
| Steering unit | |
| - Rewind | 16" diam mandrel / 406mm |
| 75 hp drive | |
| - Line Bridles | Various, one missing |
| Sold "as is, where is" installed, not in operation. |
PO Box 1164
Roxboro, NC 27573
+1 336 597 2370
+1 336 597 8633
sales@phippsMetals.com